Premium Rear Bumper Sensor / LCD Alert System
When vehicle is in reverse, 4 rear bumper sensors send out ultrasonic waves 4 times per second that detect an obstacle behind the vehicle up to 8 feet away. The waterproof controller receives the signal and transmits to the LED display with built-in speaker alert.
The LCD display speaker with 30 cable sounds long intermittent beeps when an obstacle is within 8 of the rear of the vehicle. As the rear of the vehicle moves closer to the obstacle, the beep increases in frequency. Once that distance is 1, the alert becomes a continuous sound.
Power is supplied by tapping into reverse lights. The system is activated only when vehicle is on and in reverse.
- Premium LCD Display
- Waterproof Controller
- Commercial Series
- 8 Detection Sensors
System Includes:
- Waterproof Controller - four rear 22mm sensors with 9 cable four 7 degree wedges - Premium LCD display with 30 cable drill bit scotch lock and owners manual/installation instructions
- This system also includes Four Sensor Brackets that attach under the bumper when permanent in-bumper installation is not the preferred choice.
- Premium LCD Display: This premium display provides clear crisp visual information and includes a built-in speaker alert with mute feature. The display shows distance to impact up to 8 from the rear of the vehicle and indicates on which the side of the vehicle the obstacle is located.
